-40%
(B8) 10 Silver Teflon® PL-259 Crimp Solder Connectors RG-58,141, LMR-195 more
$ 15.62
- Description
- Size Guide
Description
ns.Your purchase will consist of Ten (10)
RFC 63-1SP-195-58
All
Silver
PL-259 Type Crimp/Solder connectors
for RG-58, or RG-141,
or LMR-195, sealed in factory packages. RG-58 coax remains very popular for jumpers, mobile installations and shorter radio to antenna runs.
Soldering of the coax braid through the 4 holes in the connector body of conventional PL-259's is difficult at best. Soldering the coax center conductor in the center pin is the easy part. These Crimp/Solder type connectors eliminates the difficult soldering of the coax braid by using precise crimping, while retaining the pleasure of simple soldering of the center conductor.
Installation of RF connectors by crimping
is the preferred method of attachment by most commercial manufacturers
due
the
quick,
quality fitment along with low cost
.
Included with each purchase is a 3/8-inch diameter, 10-inch length
of
"Therm-O-Sleeve"
, Pol
y
olefin 2:1 heat shrink tubing
(sufficient to cut into 10, 1-inch lengths). Installing heat shrink
gives a professional
and attractive
look
to your connector installation. This heat shrink tubing is shown installed on Belden RG-5
8
in our photograph. These connectors are popular for making jumpers for use in the radio shack
and for mobile installations.
A quality crimp tool such as our
RFC Model 63-DL-801G
, which is
available in our EBAY
a
uction number
150977088410
,
will make thousands of crimp cycles. We also offer replaceable crimp dies to allow crimping of other size coax & connectors.
See our listing
s for
other quality crimping tools for this and other crimp type connectors in several connector types including BNC, Type N, UHF, SMA TNC and more..
Personal, friendly and fast shipping service is also included.
Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector, not a stock, representative or generic photo or drawing.
Generic, stock or representative photos copied from manufacturers websites, are often used when selling inferior items, or an entirely different item. Why would a seller not photograph the actual product he wants to sell?
Mechanical:
Superior quality construction consisting of a 30-micron silver plated body,
center contact tip, and crimp
ferrule
for ease of soldering & low contact resistance.
The insulator is
DuPont™
Teflon
®
dielectric known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures.
Electrical:
50-Ohm impedance, variable, DC to 300-Mhz (Commonly used up to 512-Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from
-65C to 165C (-85F to 329F)
.
RoHS Compliant
by Directive 2002/95/EC.
We gladly combine shipping with our other items.
SHIPPING INFORMATION:
FREE via USPS First Class with 2-5 day delivery anywhere in the USA.
No international shipping.
We would like to be your connector provider. Give us a try, you'll be glad you did.
Email with questions.