Cable 66 Motorola 16-pin Maxtrac GM300 VHF UHF Repeater

Description

DEAR VALUED CUSTOMERS:
BEFORE BUYING THIS PRODUCT:
Please check out the
MONEY-SAVING TIP
below.
===================================================================================
ITEM DESCRIPTION
:
(One) 72" shielded cable assembly with perfect-fit latching plug at one end to mate with Motorola radios having a 16-pin rear accessory connector, i.e.:  M10, M100 & M200 series, M1225, Radius, Maxtrac, GM300, etc.
All my kits feature connector shells and contact pins manufactured by AMP, the same supplier used by Motorola.  The
AMP
parts in my kits are
identical in quality and precision
to the
AMP
parts found in "Motorola brand" kits.  The pre-attached contact pins in my kits are professionally installed to AMP specifications using automated AMP tooling, for a perfect fit and flawless mechanical and electrical connection.  Check out the
positive feedback
from hundreds of satisfied customers who've discovered the quality and value of connector kits from
MRE1032.
This cable assembly features a high quality, flexible, 4-conductor cable with individually color-coded, stranded 24 awg conductors and an overall foil shield with drain wire (5-conductors total).
Five (5) pins of the radio connector are brought out to flying leads.
This cable is wired as follows
:
Pin #
2     MIC                                             WHI
(use this input for speech audio - see
Notes
below
)
3     PTT                                            BLK
11   Receive Audio                            GRN
8     Programmable Output (COR)     RED
7     Ground                                       Bare (drain wire)
15 -16  Jumpered to enable internal speaker
Notes:
This cable (66) is perfect for hooking up 16-pin radios to many external accessories, such as single-user repeater controllers, tone remote adaptors, and other voice applications that do not involve the transmission of signaling or data, and when the transmit PL tone (if any) will be generated by the radio itself (not by an external source).
For the transmission of
data or signaling tones only
(such as APRS, CW beacons, SCADA, telemetry and other non-voice applications), it is recommended that Pin 5 (Flat TX Audio Input) be used instead of Pin 2 (Mic Input). The frequency response of the radio's Flat TX Audio Input is better suited to the transmission of data & signaling (including externally generated xmit PL tones).  Cable # 76 would work better than this cable (66) for those applications.  Cable 76 injects transmit audio via radio Pin 5 instead of Pin 2.
For the transmission of speech audio (via the mic input) AND externally generated PL (via the Flat TX audio input)
at the same time
, please see Cable #103 (3 ft) or Cable #106 (6 ft). Cable #103 and 106 make connections to radio Pins 2 and 5 (both).
If you are not sure which of the radio's transmit audio inputs will work best in your particular application, choose Cable #103 (3 ft) or 106 (6 ft)   You can try both inputs to determine which performs optimally.
Includes
data sheet
with connector pin numbers & wire color codes,
describing radio functions and pinouts.   Hard-to-find item, reasonably priced.
NOTE
:
Please view my
other items
(click on
MRE Direct
,
above).
I offer several different versions of this 16-pin cable, as well
20-PIN
cables for the CDM and PRO series and other connector kits and parts.
===========================================================================================
MONEY-SAVING TIP:
MRE1032 is pleased to offer
FREE UNLIMITED COMBINED SHIPPING.
BEFORE PAYING
, please browse our
eBay Store,
MRE DIRECT
,
for additional products you may be interested in.
To enter our store, click the small  "Door" icon near the top-right of this listing.
When buying multiple items, you can save on shipping.
HERE'S HOW
:
Don't click
"Buy it Now"
and pay for each item separately,
because this results in
separate shipments and shipping fees
for each item.
INSTEAD:
click
"
ADD TO CART
"
for each item
When all desired items are in your cart,
transmit
ONE
PayPal payment for the entire order
. This way,
you'll pay to ship only ONE (1) item.
ANY & ALL
additional products
on the same payment
ship free - no limit !
Mobile App Users
:  If an  "Add to Cart"  button is not visible on eBay's mobile app,  use a computer instead.
===========================================================================================
RECEIPT OF PAYMENT
is expected within 7 days after purchase.
ALL ORDERS SHIP WITHIN 24 HOURS
after receipt of payment.
U.S. SHIPPING ONLY
Due to excessive losses involving international orders, we regret we are no longer shipping outside the United States or replying to emails regarding same.
===========================================================================================