Auto Focus MPPT Solar Panel Regulator Charge Controller Tracking Easy Connect US

Description

Features:
- Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
- Charge 12V /24V lithium battery, super wide charge and discharge adjustable
- The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available).
- Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery
- Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
- R5.0 solar charging DC plug, R5.0 DC lamp output DC plug, easy to connect
Product parameters:
Product Name: LCD screen solar controller
Voltage: DC 12V / 24V
Rated charging current: 10A/30A/100A
Display: LCD screen
Self-consumption: <10MA
Overcharge protection: 14.4V / 28.8V
Overcharge Float charge: 13.7V / 27.4V
Charge recovery voltage: 12.6V / 25.2V
Over discharge protection: 10.7V / 21.4V
Over discharge recovery: 12.6V / 25.2V
Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.)
Working temperature: -35 ℃ -60 ℃
12V fits 18V solar panel, 24V fits 36V solar panel
12.0 volt lead acid battery corresponding
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
12.8 volt lithium iron phosphate battery corresponding
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
11.1 volt lithium battery corresponding
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
Function:
1. Always keep the battery on fill voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from reverse charging to solar panels during nights.
5.Reverse Polarity Protection for Battery
6. Reverse Polarity Protection for Solar Panels
7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
8. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃
condition, locked by the CPU procedure, cannot adjust.)
9. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
10. Thunder protection
Package Includes：
1pc x Solar Panels Battery Charge Controller
1pc x User Manual