-40%

2 Magna High Output Performance Coils 3 ohms Kawasaki KZ400/440/550/650/750/900

$ 47.49

Availability: 78 in stock
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: Taiwan
  • Item must be returned within: 30 Days
  • Restocking Fee: No
  • Manufacturer Part Number: COIL-9-2
  • Brand: Coils
  • Condition: New
  • Refund will be given as: Money Back
  • Returns Accepted: Returns Accepted

    Description

    Set of 2 Magna Dual Output Coils - 3 ohms -
    Kawasaki KZ400/440/550/650/750/900 Ninja ZX10
    This dual output high performance Manga coil is best used with CDI, aftermarket electronic ignitions and factory electronic ignitions. Some of the models in the Kawasaki / Suzuki fitment list came stock with points type ignitions, but it is common to upgrade to an electronic ignition. For points type ignitions, we suggest using the
    5 ohm version
    . Sold individually.
    Features & Benefits:
    No exposed lamination's to rust and degrade performance.
    High voltage and primary terminals machined from brass.
    Ultrasonically welded and sealed against moisture.
    Compact size fits easily under stock covers.
    High impact thermoplastic housing.
    Over 30,000 volts per output.
    Accepts 7 to 8.5mm wires.
    Specifications:
    Primary Resistance = 3 ohms
    Secondary Resistance = 13,000 ohms
    Mounting Holes = 90mm or 102mm (measured center to center)
    Mounting Posts = 13mm Width x 12mm Height
    Includes Hardware, wiring and boots shown in the photo.
    NOTE:
    When choosing the right coil for your bike, never select a coil with a lower resistance than your ignition system, this will cause the coils to overheat and burn out. Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used. Wires can be mounted on either terminal (no polarity + or - ). Some models below may require custom mounting brackets.
    Replaces Honda part numbers: 30510-MA6-013, 30500-422-003, 30500-422-013, 30505-MB9-003
    Fits Kawasaki: (With electronic ignition)
    LTD - KZ550-C2 - 1981
    KZ550-A3 - 1982
    LTD - KZ550-C3 - 1982
    GPz - KZ550-H1 - 1982
    GPZ600 - 1991-1996 Non US model
    Custom - KZ650-C1 - 1977
    KZ650B Z650 - 1977-1979
    KZ650C Custom - 1977-1979
    KZ650-B2 - 1978
    KZ650-B2A - 1978
    KZ650D SR - 1978-1979
    Custom - KZ650-C3 - 1979
    KZ650-B3 - 1979
    SR - KZ650-D2 - 1979
    LTD - KZ650-E1 - 1980
    KZ650-F1 - 1980
    CSR - KZ650-H1 - 1981
    CSR - KZ650-H2 - 1982
    KZ750B LTD Twin - 1976-1979
    KZ750-E1 - 1980
    LTD - KZ750-H1 - 1980
    LTD II - KZ750G - 1976
    KZ750-G1 - 1980
    KZ750-E2 - 1981
    LTD - KZ750-H2 - 1981
    KZ750-E3 - 1982
    LTD - KZ750-H3 - 1982
    CSR Twin - KZ750-M1 - 1982
    GPz - KZ750-R1 - 1982
    Spectre - KZ750-N1 - 1982
    KZ900-A4 - 1976
    LTD - KZ900-B1 - 1976
    KZ900A - 1976-1977
    KZ900B LTD - 1976
    KZ900C Police - 1976
    Z1 900 - 1973-1975
    Z1P Police 900 - 1975
    KZ1000A - 1977-1978
    KZ1000A MKII - 1978-1980
    KZ1000B LTD - 1977-1980
    KZ1000 - KZ1000-A2 - 1978
    KZ1000 - KZ1000-A2A - 1978
    KZ1000 - 1978
    LTD - KZ1000-B2 - 1978
    Z1R - KZ1000-D1 - 1978
    KZ1000 - KZ1000-A3 - 1979
    KZ1000 - KZ1000-A3A - 1979
    Shaft - KZ1000-E1 - 1979
    KZ1000 LTD - KZ1000-B3 - 1979
    Classic - KZ1000-G1 - 1980
    LTD - KZ1000-B4 - 1980
    KZ1000 - KZ1000-A4 - 1980
    Shaft - KZ1000-E2 - 1980
    Z1R - KZ1000-D3 - 1980
    Police 1000 - KZ1000C - 1978-1979
    Police 1000 - KZ1000-C3 - 1980
    Ninja ZX-10 - ZX1000-B1 - 1988
    Ninja ZX-10 - ZX1000-B2 - 1989
    KZ1000D Z1R - 1977-1980
    KZ1000E - 1979
    KZ1000G Z1 Classic - 1980
    GPz - KZ1100-B1 - 1981
    Shaft - KZ1100-A1 - 1981
    GPz - KZ1100-B2 - 1982
    Shaft - KZ1100-A2 - 1982
    Spectre - KZ1100-D1 - 1982
    LTD Shaft - KZ1100-L1 - 1983
    Shaft - KZ1100-A3 - 1983
    Spectre - KZ1100-D2 - 1983
    4into1motorcycleparts

    Store Policies