12V Ignition Coil - Honda CB350 CL350 CB360 CL360 CJ360 CB450 CL450 CB500 Twins

Description

12V Ignition Coil - Honda CB350 CL350 CB360 CL360 CJ360 CB450 CL450 CB500 Twins
Reproduction 12V Honda ignition coil,
it can be used on the left or right side.
This coil replaces the stock style coil that came on many of Honda's CB/CL/SL twins from the 70's. Use it with your points ignition or electronic ignition. This could also be an opportunity to replace the stock spark plug caps. Fan out the spark plug wires before twisting on the caps.
Spark plug wire is 19" long
Mounting holes are approximately 80mm (3.15") apart. (measured from the center of each hole)
6.5" blue wire with dual female bullet connector
5.25" black/white line wire with male bullet connector
Overall Outer Diameter: 48.6mm at the widest point.
Primary Windings: 5 ohms
Sold individually
. 2 coils are necessary for all of the models listed below.
Note:
This coil does not come with any hardware to install it. You can reuse the stock bolts.
Replaces Honda Part Numbers:
30500-283-000 (Coil assembly for CB450K0)
30500-292-672 (Coil assembly for: CB450K1-K7, CL450K, CB500T)
30500-312-007
(Coil assembly for the CB/CL/SL350)
30510-369-004, 30520-369-003 (Coil assemblies for the CB/CJ/CL360's)
Fits Honda:
CB350K - 1968-1973
CB350G - 1973
CL350K Scrambler - 1968-1973
SL350K - 1969-1973
CB360K - 1974
CB360G - 1974
CB360T - 1975-1976
CJ360T - 1976-1977
CL360K Scrambler - 1974-1975
CB450K - 1965-1974
CL450K Scrambler - 1968-1974
CB500T - 1975-1976
4into1motorcycleparts
•
Store Policies