-40%

1025 Ford Harmonic Balancer Holder

$ 20.35

Availability: 74 in stock
  • UPC: 53001010257
  • Condition: New
  • Brand: Autopart

    Description

    Holds Harmonic Balancer in place when removing or installing center bolt of Ford Taurus Pulley Extension
    Tool can be used to turn the engine to gain access to the torque converter bolts and hold the engine stationary while loosening and tightening them
    Tool provides easy method to hold crankshaft while loosening and tightening harmonic balancer retaining bolt
    Harmonic balancer removal is necessary to replace front engine seal, replace timing chains, and remove engine heads
    On 96-05 Ford Taurus and Mercury Sable this tool makes removing and replacing the serpentine belt extension pulley much easier. It provides a good method of holding the engine when removing the extension pulley.
    For 2.5L, 3.0L V6 Duratec & 3.5L EcoBoost engine from mid '90's to '16, including:
    Ford F-150
    Ford Contour
    Ford Taurus
    Jaguar S-Type
    Lincoln LS
    Mercury Sable
    Mercury Cougar
    Mercury Mystique
    Mazda Tribute
    5/16" thick steel base welded to three 3/4" prongs
    OAL: 4.45"
    OAH: 1.25"
    Pin(s) Height from base: .95"
    Use with 1/2" square drive tools
    Can use 8mm x 1.25 bolt to hold tool to balancer for some applications
    Won't warp balancer
    No need to lock flywheel!
    Application Chart:
    Make
    Model
    Engine
    Year
    Ford
    F-150
    3.5L
    2013-2016
    Ford
    Contour
    2.5L
    1994-2000
    Ford
    Taurus
    2.5L
    1992-2007
    Jaguar
    S-Type
    2.5L & 3.0L
    2000-2008
    Lincoln
    LS
    3.0L
    2000-2006
    Mercury
    Sable
    3.0L
    1992-2005
    Mercury
    Couger
    2.5L
    1999-2002
    Mercury
    Mystique
    2.5L
    1994-2000
    Mazda
    Tribute
    3.0L
    2001-2011
    INSTRUCTIONS:
    1. To remove center bolt, align tool with balancer between the three
    fingers on holding tool
    2. Hold with breaker bar
    3. Turn to remove center bolt
    4. Repeat above instructions in reverse to install center bolt