10 Silver-Teflon-Gold PL-259 Connectors + UG-176 Reducers RG8X LMR240 RG8 LMR400

Description

Thank you for visiting our store. We would like very much to be your connector provider.
Your purchase will consist of Ten (10)
RFC Model 63-1SP-3280
Silver PL-259 Type straight solder connectors and Ten (10)
RFC
Model 63-89S
(UG-176 Type) Silver Reducers for RG-8X (Mini 8), RG-59,
or LMR-240, all sealed in factory packages.
See our other listings for UG-175 Type reducers for RG-58 Coax. Without the reducers, this connector may be used with RG8, RG-213, RG-214, Belden 9913, Belden 8214, LMR-400 and other similar 400 series and RG8 Type coax cables.
Personal, friendly and fast shipping service is also included.
Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector, not a stock, representative or generic photo or drawing.
Generic, stock or representative photos, copied from manufacturers websites, are used by others when selling inferior items, or an entirely different item.. Why would a seller not photograph the actual product he wants to sell?
I'm in the Marine Electronics Service business and always use quality components.
W
ithout exception,
these are truly quality
RF connectors!
Unlike Nickel plated bodies requiring more preparation, time & heating for soldering, these Silver connectors will be a quick, easy and positive soldering experience.
Additionally, a silver plated body offers less resistive coupling, and thus better power transfer with less heat, especially at higher RF-power levels.
Since Silver is one of the best conductors of electrons, and because RF energy flows in
both
the center tip and connector body, it follows that
both a silver plated tip
and
silver plated body is the better way to go.
Soldering is a
craft requiring
proper tools including the correct solder alloy
, correct flux content, correct heat and other tools. It requires proper preparation of the components to be joined and it also requires skill.
Years ago, minimal soldering skills could
accomplish acceptable soldering connections
for RF connectors on coax.
Today,
low loss
coax cables such as LMR and others, use gas-injected foam technology replacing the old solid polyethylene dielectric (insulator).
This technology, while creating a
superior conductor, has conversely introduced a potential problem, especially
for the occasional soldere
r. A little too much heat applied
during the soldering process, can easily result in
damage to this temperature sensitive foam
insulator
, resulting in distortion and melting,
creating a brown, tarry substance
ultimately resulting in impedance characteristic changes to
the cable.
My suggestion / recommendation
for all levels of soldering skills is to
always
use connectors with a Silver Plated
body and tip
, which not only greatly speeds up the soldering process helping eliminate
o
verheating
, but also enhances RF signal
flow
.
Mechanical:
Construction consists of a 30-micron silver plated machined brass body and coupling nut, and a 5-micron never tarnishing, Gold Plated center contact tip.
DuPont™
Teflon
®
dielectric (insulator) is used as it's the most inert of all insulator materials used in RF Connectors offering excellent
permittivity
, strength, and higher withstanding voltages over a wide range of frequencies and temperatures.
The premium silver and Gold plating assures a quick and positive soldering experience. We've received nice comments about this connector from many purchasers in our feedback.
Electrical:
50-Ohm impedance, variable, DC to 300-Mhz (Commonly used up to 512-Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from
-65C to 165C (-85F to 329F)
.
RoHS Compliant
by Directive 2002/95/EC.
Included with each purchase is the RFC data & drawing sheet with all installation information needed for correct cable fitment.
We gladly combine shipping with our other items.
SHIPPING INFORMATION:
FREE V
ia USPS First Class Mail with 2-5 day normal delivery time.
No international shipping.